Basic documentation for envelope senders, registered users and administrators of an organization for the eSignAnyWhere product. After reading this guide you will know how to create and send signature requests and manage all organization related settings.

Create and Send Envelopes


In addition an advanced guide and an electronic signature guide are available for further information (also linked at relevant chapters).

To create a new envelope (or documents you want to have signed), just click on “New Document” or directly click “Upload” on the Dashboard. In addition, if you upload a document via Microsoft Office Plugin (available in the user menu top-right), you can select it from the Clipboard.

To send an envelope you have to go through three steps:

  1. Create envelope and define its workflow
  2. Designer to place signature and form fields
  3. Send Envelope

You also can save the envelope as Draft or Template.

(1) Create Envelope


When you create a new envelope, you can set at least the following parameters:




  1. Envelope
  2. Documents
  3. Recipients
  4. Message


The buttons “add bulk” and “bulk CSV template” are features, which are not part of every eSignAnyWhere plan. So you may not see these buttons in your eSignAnyWhere.



  1. Defines order in workflow
  2. Address book
  3. Phone number
  4. Task
  5. Personal message
  6. Authentication
  7. Additional details


Additional information to the phone number of the recipient: The phone number of the recipient is connected with the following three phone number settings:

  • SMS-Authentication (Authentication settings->SMS-Code)
  • Disposable certificate (Additional details->Disposable Certificate)
  • SMS-OTP Signature (Additional details->SMS-OTP Signature)

If you enter a phone number for the recipient, these three fields are also filled out. You can then either accept the phone number (default) or change the phone number for, for example, SMS-Authentication (custom). For more information please also see the video below.




  1. Authentication settings


phone_settings.mp4

(2) Designer


The Designer helps you to assign predefined signature fields of the document to the recipients and define additional signature fields and form fields.

  • Recipients: Select a recipient for placing signature or form fields by drag and drop. Every recipient has its own color to be easily visible at the document preview.
  • Form fields and predefined fields: signature field and form fields (e.g. text form, checkbox, radio button) and predefined field (e.g. initials of the recipient)
  • Document: The document shows the pages of the envelopes documents and the placed elements (signatures and form fields) can be easily moved, edited (by clicking on it) and deleted (except predefined form fields of the uploaded PDF document).

The next figures show you how to add for example signature fields and textfields in the eSignAnyWhere viewer. In the video you see how you can position the fields and how you can change the settings of the form fields. For example we changed the settings of the first signature field in the video from Click2Sign to Draw2Sign (if you select more than one type, the signer can choose his signing method).


Signature_Fields.mp4
  1. Compact view



  1. Recipients
  2. Tools
  3. Document

Define Signature of Recipient


Please also see the electronic signature guide.

By clicking on a signature field, you can define its setting and behavior. Following options are available:


  1. No required field
  2. Required field (highlighted in red)



  1. Signature settings

Batch-Signature


To increase the recipient’s user experience, you can use the batch signature. This allows the recipient to sign more than one signature field at once. Therefore, you have to select a first signature field and add the “Batch Signature” option. You can add more signature fields to the multi-signature field. So a signer is optionally able to sign all fields at once!

Properties and Limitations:

The following screenshot show you how to configure batch signing:


  1. Simple Batch

In the drop down for the batch signature (highlighted with the arrow) you have the following options:

Form Fields


You can add form fields simply by drag and drop and place it on the document or via the advanced tags as predefined fields.

Designer, Form fields, elements

The following form fields are available:

Some of the fields enable an advanced setting, where you can define additional settings (e.g. font family).

(3) Send Envelope


With the last step of creating and sending an envelope you get a summary, document list and notification setting of the envelope.




  1. Summary
  2. Notification settings
  3. General settings
  4. Send the envelope

Envelope Management


In addition an advanced guide and an electronic signature guide are available for further information (also linked at relevant chapters).

Documents, Filter and Status


Documents will list your sent envelopes & drafts and envelopes you have to sign (sent by someone else). It also shows you the envelope status and allows you to filter and manage the envelopes.

Features

Figure
Description

  1. Filter
  2. Search
  3. Status
  4. Export as CSV
  5. Actions

Document Status Icons


This list shows you the available document status icons, a textual representation is next to the icon in eSignAnyWhere.


eSAW Status Icon Finished

Envelope is finished

eSAW Status Icon Cancel

Envelope is canceled by one of the recipients

eSAW Status Icon Rejected

Envelope is rejected by one of the recipients

eSAW Status Icon Draft

Envelope is a Draft

eSAW Status Icon Pen

Waiting for signing

eSAW Status Icon Eye

Waiting for acknowledge

Caution (e.g. email bouncing)

eSAW Status Icon Expired

Envelope is expired


Note: If you select an envelope you can select all available actions from the top bar (Sign, Remind, Restart, Cancel, Delete, Unlock). The action-button in the list of envelopes shows the typical required action.

Envelope Details


To modify an envelope just click on it to load the envelope details page. On this page you can see the defined workflow with recipients, the document(s) and basic information about the envelope (e.g. start and expiration date). Moreover, you are able to enable or disable, if the envelope is shared with your team members.

Possible Actions on the envelope:

Document Detail Page with highlighted envelope and recipients area.

Figure
Description

  1. Details
  2. Recipients
  3. Message

Finished envelopes will allow you to download the finished documents and audit trail (log document). If you have the developer mode enabled, you can download the envelope configuration as XML and JSON. The next screenshot shows where you can download the finished document and the audit trail:

Figure
Description

  1. Download documents

The audit trail shows all information about the envelope e. g. the general information (status of the envelope, the creation date and more). Moreover, it shows the recipients and all changes made to the document e. g. which signature fields were placed on the document, the information about the time when the workstep was finished and more.

The finished document shows the PDF including the signed signature fields. Please also have a look at the signer guide.

Edit & Delete Recipient


It is possible to edit or delete a recipient after the envelope was sent. Therefore, you just click on “edit” to change user details (First Name, Last Name, Email), set the personal message, change authentication method, set digital remote signature or set SMS-OTP signature. You can just change details of recipients, who did not yet fulfill their assigned task. Finished recipients are shown via icon in the Document detail view. “Delete” will delete the recipient’s envelope, as long his signing task was not yet finished.

Clipboard


The “Clipboard” link will show you a window with a link (to copy) to the recipients envelope for signing. In case the signer has a problem with receiving the email, you can send the link to the recipient via other channel (e.g. instant messenger).

FigureDescription

  1. Clipboard

Document Preview


The document preview will show you a small and, by clicking on it, a large preview of the document.

Filter Document


When you first load the “Document” page no filters are applied. All your envelopes are listed in it. You can easily add filters by selecting them from the menu (left) and set text filters.

The applied filters are listed at the top and you can remove specific filters by clicking on the “x” or reset all filters.

Download as CSV


You can also download CSV (comma-separated values) files. So you can open them in e.g. Microsoft Excel for analysis or reporting.

FigureDescription
  1. Download as CSV

The CSV contains:

Templates


Templates can be used for recurring documents or workflows. You can prepare them and directly use them from the template page. When you use or edit the template the procedure is similar to create envelope, except the prepared configuration is used.

Features:



If you open a template, where you have already set signature and form fields, but you need to replace the document without losing the configuration, just click after loading the template, on the replace icon of the document.

FigureDescription
  1. Replace

Document Tags and Placeholders


We offer to make the document generation easier or support dynamic document length a possibility of document tags (signature fields) and advanced tags (signature fields, workflow, input fields).

Here you can download a PDF which contains one recipient with a Click2Sign signature field by using the tags. For a complexer example please see the Advanced User Guide and the advanced tags.

Document Tags


This section will show you how you can use documents with eSAW. eSAW will work with PDF documents. To generate PDF documents you can use Microsoft Office, Open Office or most of the typical document suites. If your document suite does not export PDF documents you can install a PDF printer on your computer. Instead of printing a document it will be exported as PDF file. There are many different printers available (open source to commercial).

Placeholder for Signature fields

To place signatures fields via workstep configuration can be a little bit “overhead” in some simple cases. Therefore we offer you the possibility to place signature fields directly in the document via tags. These tags are called SigStrings (SignatureStrings).

Example of a SigString, which is places as text directly in the document:

`sig,fd=Confirm the General Terms`

If you place this string as normal text in your document, eSAW will replace it with a default signature field. The parameter fd=Confirm the General Terms is the field description. We recommend to place the SigString with the paper color (typically white) in the document, so the string itself is “invisible”.

Following Parameter are supported:


req0: disabled, default / 1: enabled
fnaname of the signature field
fdfield description, gets displayed during signing in WSI
sigTypesignature type, supported: BiometricSignature, Picture (Click2Sign, Type2Sign, Draw2Sign)


Example 1: Simplest SigString, just a optional signature field

`sig`

Example 2: SigString, required, with description, name and as biometric signature

`sig,req=1,fd=myFd,fna=myFna,sigType=BiometricSignature`

Example 3: SigString, not required, as Picture (Click2Sign, Draw2Sign, Type2Sign)

`sig,req=0,sigType=Picture`

As position for a signature field, the lower left beginning of the sig-string will be taken. In case the string part of a word, the beginning of the word will be the position.

These SigStrings are also supported via API (use AdHoc configuration to modify them). So you can dynamically place signature fields on the document (e.g. sometimes on bottom of page 3, sometime on top of page 4).

Advanced Tags


Advanced tags support you with more flexible tags, such as form fields (radio buttons, check boxes, text fields, …), styling and workflow features. Even an input validation is available. If you want to use the advanced tags, please go to the Advanced User Guide.

In the following section you find a list of additional features, which are not be part of every eSignAnyWhere plan.

Additional Envelope Features


Bulk Envelopes


For further information please see the Advanced User Guide.

This feature allows you to send an envelope to multiple signers. The workflow will be split at this order into unique envelopes for each bulk recipient. This allows you to create a workflow, where the first signer (e.g. head of a department) signs the document and then each of the bulk recipients (e.g. employees of the department) receives a unique document for signing.

Design the Workflow



  1. Add a bulk as recipient
  2. Information to upload a CSV
  3. Create a bulk CSV for upload
  4. CSV upload


Create a Bulk CSV with a template


  1. CSV recipients

The import CSV (with PIN authentication) should have the following parameter, where the first line is required as column identifier:

FirstName, LastName, Email, Authentication>>Pin, Authentication>>Pin>>Param
Charly, xyzmo, charly@namirial.com, false, 1234
Bob, xyzmo, bob@namirial.com, true, 5555

If the Authentication>>Pin is enabled (true) the authentication is activated. The last number is an example value for a parameter for the authentication.


  1. Contains all recipients inside the bulk

After creating your CSV, you can upload it. Afterwards you can continue the standard process of creating an Envelope. For further information please see the Advanced User Guide.

Automatic Remote Signatures


eSignAnyWhere allows you to use automatic remote signatures to be applied to a document. Details are available in the Advanced User Guide. Please contact your Namirial Sales if you are interested in this feature.

PKCS#7 Signer


This is a feature to allow the signer to sign a document with a PKCS#7 signature. You find details in the Advanced User Guide.

SwissCom On-Demand-Certificate


Please contact your Namirial Sales if you are interested in this feature.

BankId


Please contact your Namirial Sales if you are interested in this feature.

Clipboard & Microsoft Office Plugin


You find the Microsoft Office Plugin for download in the top right account menu:


  1. Microsoft Office plugin

Download the plugin and install it:


The plugin directly uploads the document in the clipboard of your eSignAnyWhere account. After the installation, you can use in Microsoft Office the eSignAnywhere Plugin, but first you have to configure it with your user token. The user token can be found in your Settings/Account page.

If you upload a file, it appears in your clipboard. A uploaded clipboard file can be used for one envelope. Therefore, if you click on the button “start envelope” the file will be deleted from the register clipboard.  If the retention period is enabled, the clipboard files are deleted automatically after 24 hours.

  1. Add-Ins

You can find the plugin in “Add-Ins”


Configure the user token:


If you use eSignAnywhere on premise you also can configure the endpoint (URL).


By clicking “Upload to Clipboard” the document will be uploaded to the clipboard. To use the uploaded file, just go to your clipboard and click on “Start Envelope”. A clipboard file can only be used for one envelope.


If you want to create your own “upload-to-clipboard” application, you can easily do it via API (UploadUserFile_v1 [SOAP]). Only the user token and a file XML, similar to the upload data structure (UploadTemporarySspFile_v1) and an optional source of the file.