...
| Info |
|---|
It may take some minutes until the new design is applied to your eSignAnyWhere Viewer. |
| Section |
Viewer Preferences
| Info |
|---|
Note that changes of the viewer preferences will be effective within some minutes after uploading the changed Customization.zip file. The changes are applied also on existing envelopes. Note that changes may have legal effect even on older envelopes (e.g. enabling/disabling the SkipFinishConfirmDialog, FinishWorkstepOnOpen, AcceptAgreementDisabledUntilRequiredActionsDone but also others); consider the impact of a change carefully. |
| Name | Description | Values | Note |
| MessageForwardingDialogBehaviour | Either ‘Show’ or ‘Allow’; If ‘Show’ is set and forwarding JS PostMessages to e.g. a parent iFrame when setting PostmessageClient query parameter the user will get asked if he/she wants to allow this. When ‘Allow’ is set, the user will not get asked and sending messages to the iFrame automatically gets allowed. | Possible values: 0, 1 (default) | |
| ShowPageNavigationBar | Allows to disable the page navigation bar on the left side of the viewer | Possible values: 0, 1 (default) | Deprecated => Use ShowPageNavigationButtons instead |
| ShowThumbnails | If enabled, the thumbnail display will be visible, otherwise false | Possible values: 0, 1 (default) | |
| SkipFinishConfirmDialog | If enabled, finish action will be executed immediately without confirm dialog | Possible values: 0 (default), 1 | |
| SkipDocumentDialog | If enabled, the download document dialog after finishing the workstep will be skipped | Possible values: 0 (default), 1 | |
| ShowImagesInFullWidth | If enabled, available width will be used for images which might stretch them | Possible values: 0 (default), 1 | |
| DisableGeolocation | If enabled, Geolocation won’t be used for webservice calls | Possible values: 0 (default), 1 | |
| ShowDocumentDownloadDialogAfterAutomaticFinish | If enabled, the “Download documents dialog” after automatically finishing the workstep will be shown (e.g. acknowledge receipt scenario) | Possible values: 0 (default), 1 | |
| AttachmentsMaxFileSize | Allows to configure the maximum file size for attachments in kBytes | Possible values: Any integer value, (default: 2048) | Not possible via customization |
| SkipPreviewImageOnDisposableCertificate | Allows to disable the preview image of the signature when using the Namirial Disposable certificate functionality | Possible values: 0, 1 (default) | |
| LoadCustomJs | If enabled, a Custom.js file will be loaded when the page is opened allowing to configure customized data | Possible values: 0 (default), 1 | Not possible via customization |
| AllowCustomButtons | If enabled, custom buttons can be added via xyzmo.Customization plugin | Possible values: 0 (default), 1 | Not possible via customization |
| GuidingBehavior | Defines how the viewer should guide through the tasks | Possible values: GuideOnlyRequiredTasks, GuideRequiredAndOptionalTasks (default), GuideDisabled | |
| FormFieldsGuidingBehavior | Defining how the viewer should guide through form fields | Possible values: AllowSubmitAlways (default), AllowSubmitOnlyAfterAllRequiredFieldsAreDone | |
| ShowVersionNumber | Defining if the viewer should show the version number | Possible values: 0, 1 (default) | Deprecated => Use ShowStatusBar instead |
| EnableWarningPopupOnLeave | Defining if the viewer should display a warning popup when the user leaves the page | Possible values: 0, 1 (default) | |
| WarningPopupDisplayAfter | Defining when the warning popup should be displayed | Possible values: FillOrSignField (default), Authentication, Always, Agreement | |
| FinishWorkstepOnOpen | If set to 1 the workstep is automatically finished when opened in the viewer, if finishing is possible | Possible values: 0 (default), 1 | Not possible via customization |
| MultipleSignatureTypesAndBatchSigningSettings / IsUseBatchSigningCheckedByDefault | If enabled, the “Use batch signing” checkbox inside the dialog when signing a signature field is checked by default | Possible values: 0, 1 (default) | |
| MultipleSignatureTypesAndBatchSigningSettings / IsRememberSignatureTypeCheckedByDefault | If enabled, the “Remember signature type” checkbox inside the dialog when signing a signature field is checked by default | Possible values: 0 (default), 1 | |
| MultipleSignatureTypesAndBatchSigningSettings / IsRememberBatchSigningDecisionCheckedByDefault | If enabled, the “remember batch signing decision” checkbox inside the dialog when signing a signature field is checked by default | Possible values: 0 (default), 1 | |
| MultipleSignatureTypesAndBatchSigningSettings / SkipMultipleSignatureTypesAndBatchSigningDialogIfBatchSigningPossible | If enabled, and the IsUseBatchSigningCheckedByDefault is also enabled, the dialog to confirm the batch signing (and optionally choosing the signature type) will be skipped if either the signature type to use has been remembered earlier or a preferred type is set | Possible values: 0 (default), 1 | |
| AutoFinishAfterRequiredTasksDone | If enabled, finish action will be automatically triggered after last required task is done | Possible values: 0 (default), 1 | |
| GuidingBehaviorOnFinishedTask | Defines the guiding behavior after a task has been completed (e.g. signature field has been signed). This flag is not taken into account if the guiding is disabled | Possible values: NoMove, MoveToNext (default), MoveToNextAndActivate | |
| SkipThankYouDialog | If enabled, hints that the document can now be finished after all required tasks have been done, will be shown | Possible values: 0 (default), 1 | Deprecated => Use ShowFinishPossibleHint instead |
| DisplayRejectButtonInLeftBar (replaced by DisplayRejectButtonInTopBar in SSP 4.15.54 or higher) | If enabled, the ‘reject’ button will be displayed in the left bar below the ‘finish’ button as well | Possible values: 0 (default), 1 | |
| NativeAppsUrlScheme | Defines the url scheme for the native SAW Viewer applications (needed for customized SAW Viewer apps) | Possible values: Any custom URL scheme (default: esignanywhere) | Not possible via customization |
| DocumentViewingMode | Defines whether the envelope is displayed in its entirety or if only a specific document is shown at a time | Possible values: EndlessPaperAllDocuments (default), EndlessPaperPerDocument | |
| ThumbnailMode | Defines the appearance of the thumbnail view: all pages of the entire document are shown, or only the first page of each document within an envelope | Possible values: ShowAllPages (default), ShowFirstPageOnly | |
| ShowTopBar | Defines if the top bar should be visible or not. If disabled, also the ‘GuidingBehavior’ and the ‘DisplayRejectButtonInTopBar’ will be deactivated. | Possible values: 0, 1 (default) | |
| DisplayRejectButtonInTopBar (replaces DisplayRejectButtonInLeftBar from 4.15.54) | If enabled, the ‘reject’ button will be displayed in the top bar next to the ‘finish’ button as well. | Possible values: 0 (default), 1 | |
| PhoneNumberInputSettings/DefaultCountry | If ‘auto’ is defined, the first one of the list is preselected or use ISO 3166-1 alpha-2 code (f.e. ‘it’) | Possible values: auto (default), ISO 3166-1 alpha-2 code (f.e. ‘it’) | |
| PhoneNumberInputSettings/PreferredCountryList | If ‘auto’ is defined, the first one of the list is preselected or use ISO 3166-1 alpha-2 code (f.e. ‘it’) | Possible values: it,ro,at,de (default), ISO 3166-1 alpha-2 code (f.e. ‘it’) | |
| TriggerBankIdDesktopApp | Defines if the BankID desktop app should be triggered from the browser when authenticating via BankID. | Possible values: 0 (default), 1 | Not possible via customization |
| ShowPageGap | Defines whether or not to show a small gap between pages containing some bits of information (like corresponding document and page x/y) in Desktop/Tablet UI | Possible values: 0, 1 (default) | |
| AutoStartGuiding | Defines if the guiding (if disabled at all) should be started directly upon start. | Possible values: 0 (default), 1 | |
| ShowFinishPossibleHint | If enabled, hints that the document can now be finished after all required tasks have been done, will be shown | Possible values: 0, 1 (default) | |
| ShowStartGuidingHint | If enabled, a hint to the next button is shown, where the guide can be started | Possible values: 0, 1 (default) | |
| ShowStatusBar | Defines if the status bar at the bottom should be visible or not. If disabled, product and version number and biometric signature device selection window is not available | Possible values: 0, 1 (default) | |
| ShowPageNavigationButtons | allows to disable the page navigation buttons on the left side of the viewer | Possible values: 0, 1 (default) | |
| ShowZoomButtons | allows to disable the zoom buttons on the left side of the viewer | Possible values: 0, 1 (default) | |
| ShowNoGeolocationWarning | Defines if a warning should be shown in case the browser does not allow to retrieve the geolocation. | Possible values: 0 (default), 1 | Not possible via customization |
| SkipRejectConfirmDialog | If enabled, reject action will be executed immediately without confirm dialog | Possible values: 0 (default), 1 | |
| DisableSignOnPhone | Defines if SignOnPhone (if configured appropriately) should be offered as an option to sign biometrically. | Possible values: 0 (default), 1 | |
| DisableMouseForBiometricSignature | Defines if 'Mouse' should be offered as an option to sign biometrically upon using SIGNificant Device Driver. | Possible values: 1 (default), 0 | |
| SignatureComplexityChecks/Draw2Sign/MinimumPackets | Minimum count/amount of packets for a signature. Default is empty value or 0 => All signatures are accepted in terms of length | Default: 0 (disabled) | |
| SignatureComplexityChecks/Draw2Sign/MinimumTimeInMs | Minimum time in milliseconds for a signature. Default is empty value or 0 => All signatures are accepted in terms of duration | Default: 0 (disabled) |
...
Document Policies
These policies, also called "Global Policies" sometimes, define which of the features of a client are allowed on a signer activity - in case the client application supports this feature. Please note that the SignAnyWhere Viewer does not support all of these.
| Name | Description | Values | SAW-Viewer |
| AllowSaveDocument | Is the client allowed to save the workstep document | Possible values: 0 (default), 1 |  |
| AllowSaveAuditTrail | Is the client allowed to save the audittrail document | Possible values: 0 (default), 1 | |
| AllowRotatingPages | Is the client allowed to rotate the pages of the document | Possible values: 0 , 1 (default) |  |
| AllowAppendFileToWorkstep | Is the client allowed to append a file to the workstep | Possible values: 0 (default), 1 | |
| AllowAppendTasksToWorkstep | Is the client allowed to add append tasks to the workstep | Possible values: 0 (default), 1 | |
| AllowEmailDocument | Is the client allowed to email the workstep document | Possible values: 0 (default), 1 | |
| AllowPrintDocument | Is the client allowed to print the workstep document | Possible values: 0 (default), 1 | |
| AllowFinishWorkstep | Is the client allowed to finish the workstep | Possible values: 0 , 1 (default) | |
| AllowRejectWorkstep | Is the client allowed to reject the workstep | Possible values: 0 (default), 1 | |
| AllowRejectWorkstepDelegation | Is the client allowed to reject the workstep with reject type ‘Delegation’ | Possible values: 0 , 1 (default) | |
| AllowUndoLastAction | Is the client allowed to undo actions | Possible values: 0 (default), 1 | |
| AllowColorizePdfForms | Is the client allowed to colorize pdf forms | Possible values: 0 (default), 1 | |
| AllowReloadOfFinishedWorkstep | Is the client allowed to view/download the document after finishing | Possible values: 0 , 1 (default) | |
| AllowAdhocPdfAttachments | Is the client allowed to add adhoc attachments | Possible values: 0 (default), 1 | |
| AllowAdhocSignatures | Is the client allowed to add signatures which are not defined in the tasks | Possible values: 0 (default), 1 | |
| AllowAdhocStampings | Is the client allowed to add stampings which are not defined in the tasks | Possible values: 0 (default), 1 | |
| AllowAdhocFreeHandAnnotations | Is the client allowed to add adhoc freehand annotations | Possible values: 0 (default), 1 | |
| AllowAdhocTypewriterAnnotations | Is the client allowed to add adhoc typewriter annotations | Possible values: 0 (default), 1 | |
| AllowAdhocPictureAnnotations | Is the client allowed to add adhoc picture annotations | Possible values: 0 , 1 (default) | |
| AllowAdhocPdfPageAppending | Is the client allowed to append adhoc documents | Possible values: 0 (default), 1 | |
...
Configurations
Configurations for API integrations, where you directly configure the workstep per recipient.
WorkstepIdStampConfiguration
In the configuration of the workstep you can define the stamp imprint:
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
<workstepIdStampConfiguration>
<referenceCorner>Upper_Left</referenceCorner>
<color>White</color>
<location width="340" height="15" marginLeft="3" marginTop="3" />
</workstepIdStampConfiguration> |
NotificationConfiguration
Also the notification configuration is possible via the workstep configuration.
| Code Block | ||||
|---|---|---|---|---|
| ||||
<NotificationConfiguration>
<NotificationEventsNotToSend>
<NotificationEvent>ActionCalledEvent</NotificationEvent>
<NotificationEvent>WorkstepCreated</NotificationEvent>
<NotificationEvent>SignWorkstepDocument</NotificationEvent>
</NotificationEventsNotToSend>
<NotificationUrl>http://localhost:52094/ReceiverSample.aspx?WorkstepId=##WorkstepId##&EventType=##EventType##&Source=##Source##&Time=##Time##&Description=##Description</NotificationUrl>
</NotificationConfiguration> |
StampImprintConfiguration
You also can define the stamp imprint for signature fields configuration.
| Code Block | ||||
|---|---|---|---|---|
| ||||
<AllowedSignatureTypes>
<sigType id="..." type="Picture">
<allowedCapturingMethods>Click2Sign</allowedCapturingMethods>
<StampImprintConfiguration>
<DisplayExtraInformation>1</DisplayExtraInformation>
<DisplayEmail>1</DisplayEmail>
<DisplayIp>0</DisplayIp>
<DisplayName>1</DisplayName>
<DisplaySignatureDate>1</DisplaySignatureDate>
<FontFamily>Times New Roman</FontFamily>
<FontSize>11</FontSize>
</StampImprintConfiguration>
</sigType>
</AllowedSignatureTypes>
</sig> | ||||
SignAnyWhere Viewer – Opening Link
Opening a workstep with the SAW Viewer is quite easy. Just reference to the SAW Viewer endpoint and use a workstepid parameter.
<http|https>://<server>/<virtualDirectory>/SignAnywhere.html?WorkstepId=<WorkstepId>
Parameters
...
| Parameter | Values | Description |
| setLng | (de|en|it|…) | defines the UI language, if not defined the browser language is used if available, otherwise fallback to English |
| isRemoteDesktop | (0|1) | defines if Device Driver should establish a connection to DeviceDriver Client Components. Required in Citrix environments when not configured in _global.xml |
| ignoreDeviceDriver | (0|1) | defines that no device driver should be loaded. Was implemented for situations where SignOnPhone should be used. |
...
SignAnyWhere Viewer Client Finish Action
You can configure a client finish action to be redirected to an predefined URL for the signer.
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
<FinishAction>
...
<ClientAction CallClientActionOnlyAfterSuccessfulSync="1" clientName="SIGNificant SignAnywhere">http://myurl.com</ClientAction>
...
</FinishAction> |