Migrate from TEST to PROD environment
For migrating from TEST to PROD, you should have received by mail the password-protected zip, containing the JKS. You will get the password of the zip by SMS.
The steps are:
Image Removed
Make sure that the signature system works properly:
Submit any document and drag it in the area below the box “File da firmare”.
Enter the following parameters:
- Dispositivo Assegnato: DEMO
- PIN: foo123
Click on “Firma”. If all is ok, the browser will propose to save the created signature
Check if the signature has been applied
SWS appliance offers a web page dedicated for validating a signature, at this link:
- Go to link
- http://IP-APPLIANCE:8080/SignEngineWeb/
verify- settings.xhtml
Follow these steps for validating the file just signed:
- Click on "Seleziona file" and choose the file just signed
- Press on "Verifica"
At the end of validation, in otput will obtain this:
Image Removed
Don't worry about red cross, this caused by certificate associated to device name "demo" not enrolled by trusted Root CA.
The important message is: "Firma 1: DEMO NOME DEMO COGNOME" in the yellow rectangle.
Environment SWS
SWS is released with a default configuration that allows carrying out all necessary tests, using a pre-production signature system by Namirial. Obviously the resulted signatures are performed with certificates that are NOT issued by an accredited Certification Authority. Any verification of these signatures with third-party tools will report errors for unknown CA. If you want to sign with certificates enrolled by trusted CA, you should migrate from the TEST to a PROD configuration of SWS.
By default SWS is configured with TEST environment. At this link you can see the SWS configuration:
http://<IP-APPLIANCE>:8080/SignEngineWeb/help.xhtml
Like in this figure:
Image Removed
Below are the steps for migrating from TEST to PROD. It is very easy: you should only upload one JKS file, which contains the certificates for connecting to our system of signature.
Please get in touch with our consultants for obtaining such a certificate.
Migrate from TEST to PROD environment
For migrating from TEST to PROD, you should have received by mail the password-protected zip, containing the JKS. You will get the password of the zip by SMS.
The steps are:
- Go to link http://IP-APPLIANCE:8080/SignEngineWeb/settings.xhtml
- Insert the password of SWS (see the section "Default Credentials") and press "Login"
- Go to tab "Impostazioni generali"
- Press on "Seleziona file" and select the JKS received by mail
- Press "Salva"
- Press "Riavvia server"
If the migration has been completed correctly, go to this link:
http://<IP-APPLIANCE>:8080/SignEngineWeb/help.xhtml
And you will see the label PROD (like in the yellow rectangle):
Image Removed